D250P Depositor | Turbo Systems
top of page

D250P Depositor

MACHINE FEATURES

  • Ergonomically placed controls at the front and rear of the machine

  • Cleaning and changeover procedures require no tools

  • Components feature one-way fitting only

  • Interlocked hopper and rotary valve safety circuit

  • Pin-less main product piston attachment design to improve dismantling and reassembly

  • Machined Piston seals fit the cylinder bore for extremely accurate deposit Volumes

  • Weight control indicator detailing the percentage of stroke

  • Large bore Rotary Valve block to enable the processing of large particulate

  • Moveable and height-adjustable stand with 350mm flexibility

  • Noise emissions reduced to below recommended maximum standard

  • 304 and 316 Stainless Steel construction & FDA Approved acetal on other components

  • A wide range of accessories is available to suit a multitude of applications

  • Deposit range 19ml to 1363ml

  • Maximum speed at full stroke    68 cycles/min

  • Maximum speed at min stroke   250 cycles/min

An image of a D250 depositor

TECHNICAL SPECIFICATION

DIMENSIONS
920 x 1200 x 1700 x mm with stand (maximum height)

OPERATING TEMPERATURE
5c - 95c

CONTINUOUS SOUND PRESSURE
Level at 1m distance > 80.0dB

COMPRESSED AIR QUALITY
Sterile clean & dry air with dew point 2c

WEIGHT
140kg

RELATIVE HUMIDITY
45% - 65%

COMPRESSED AIR SUPPLY PRESSURE
4 - 6 bar

AIR CONSUMPTION
100m stroke deposit at 30 per minute would = ((0.669 x 10) + 0.81 + 0.315) x 30 = 234.45 litres/ min or 8.23cfm

"Turbo Systems helped us increase our productivity with their depositors and conveyors, would definitely recommend if you need food manufacturing solutions."

Steve Allington - Engineering Manager  

bottom of page